Bid-Well's versatile Texturing/Curing machines provide the best technology for increased efficiency in both texturing and curing with fully adjustable accommodations.

The Texturing/Curing machines are equipped with rubber tire skid steer or bogie drive for screed pipe rail. The curing system is a hydraulically driven pressure system designed to handle all types of curing compounds.

MAIN FRAME:

• 24" or 36" deep boom truss section.
• All welded structural steel tubing construction is used for strength with minimum weight. Truss sections are pin connected for fast set-up time and crown ability. Insert sections to extend machine length are available in 12 (3.7m), 6 (1.8m) and 3 (0.9m) foot lengths.

ENGINE:

• Air cooled, 28 HP (20.8 kw) gasoline engine with 12 volt starter and alternator, with optional 27 HP (20.2 kw) liquid cooled diesel engine.

MACHINE TRAVEL:

• Positive, Hydraulic, 4-wheel drive bogie or 16" skid steer pneumatic tires. Manual controls give forward, reverse and self braking action with variable speed to accommodate all curing applications.

MANUAL STEERING:

• Manual Steering is accomplished by the operator from the control panel. The machine travels straight forward and the operator makes skid steering corrections by slightly "feathering" the appropriate directional valve while the machine is moving.

TEXTURING:

• Transverse - The texturing carriage travel speed is variable up to 90 FPM (30 mPm). The texturing comb is raised and lowered at the end of each texturing pass. The texturing comb may be ordered with tines spaced to meet the job specification requirements.
• Longitudinal tining – Available with hydraulic lift mechanism.

SPRAYING SYSTEM:

• Full width adjustable rear mounted spray bar with windshield and side edge spray nozzles.

SPRAY TANK:

• 150 gallon (567L) capacity tank has built-in mixing jets for best mixing. The hydraulically driven pump continuously circulates curing material through mixing jets providing material transfer capabilities.

OPTIONS

TOWING:

• Trailer Dolly and Towing Tongue are available for the machine.

AUTOMATIC CONTROLS:

• Automatic controls for elevation and steering from stringline are provided by Bid-Well/CMI Hydra Mation hydraulic, proportional, sensors, with multi-position mounting and crank-type adjusters.