• The Bid-well CP-240 Concrete Placer side discharge conveyor is ideal for placing concrete ahead of a paver at various depths. The conveyor places all types of concrete and free flowing materials.
• Operator-controlled from feeder to placement. On jobsite movement with pneumatic tire drive or form riding, the CP-240 will meet all your job requirements and needs.

BID-WELL CP-240:

• Concrete Placer Side Discharge Conveyor with Standard Tilt-up Feeder End (Supported By Two 20.5 x 8 x 10 Pneumatic Tires)
• Maximum Spreading Width-60 feet (18.6m)

OIL FUEL RESERVOIRS:

• Oil Reservoir-55 Gallon (208L) * Filtration-3 Micron * Fuel-55 Gallon (208L)

POWER:

• 87 HP (116 kw) Diesel Engine

HYDRAULICS:

• Pump One Dual Stage Main Pump-50GPM (189LPM)@ 2500RPM
• Triple Stage Pump with Optional Feeder Conveyor-65GPM (246LPM)@ 2500RPM

OPERATORS CONSOLE:

• Elevated at Opposite End of Engine for Better Visibility, Quieter Operation and Total Operator Control

MAIN BELT:

• Belt-24 inches (0.60m) wide
• Speed-0 to 700FPM (213MPM) (Variable Speed)
• Idler Rollers-Precision roughing

DIVERTER:

• Discharge from Either Side
• Dual #2050 Chain Drive

DRIVE WHEELS:

• Four Wheel Drive-Skid Steer 10 x 16.5 x 8-ply Pneumatic Tires (180 degrees Pivotal Wheel for Additional Span, Movement and Tire Position)
• Operator End Steerable
• Placer can be Traveled on Jobsite without Being Towed or Trailered

TRUSS FRAME:

• 24-inch (.60m) Deep All-Welded Structural Angle Iron Truss Design
• Pin Connected Sections for Easy Assembly
• Frame Sections are 18(5.5m), 15(4.6m), 12 (3.65m), 6(1.8m), and 3 feet (0.9m)

OPTIONAL FEEDER CONVEYOR:

• Belt-24 inches (0.60m) wide
• Speed-0 to 700FPM (213 MPM) Operator Controlled
• Movement-Powered by Hydraulic Motor (Speed Controlled) Ground Operated Independently from Main Conveyor for Forward and Reverse Movement